Loading Documents In The Adf (Only For The Pc-D340/Fax-L400 Models) - Canon PC-D340 Quick Reference Manual

Loading Documents in the ADF
(Only for the PC-D340/FAX-L400 Models)
1
Make sure there is no document on the platen glass.
2
Fan the edges that will feed into the machine first, then tap the edges of multiple page
documents on a flat surface to even the stack.
3
Adjust the slide guides to the width of the document.
4
Load the documents face up in the ADF.
DOCUMENT READY
• The document is now ready for scanning.
• For multiple page documents, the pages are fed one by one from the top of the stack (from the first
NOTE
page).
• Wait until all pages of your document have been scanned before starting a new job.
• 50 sheets of A4-size (80 g/m
documents are set in the ADF, paper jams may occur.
2 ) documents can be set in the ADF. If more than 50 sheets of A4-size
3
3-3