Table of Contents
Advertisement
Usage:
Query Syntax:
Example:
Usage:
Query Syntax:
Returned Format: <value>, <string>
:STATus:PRESet
The :STATus:PRESet command presets the enable registers for all status
nodes. Enable registers have no function in this instrument, but the command
is included for compatability with the SCPI standard. Table 4-5 shows the
value of each enable register.
HP-IB only
:STATus:PRESet
OUTPUT 711;":STATUS:PRESET"
Table 4-5. Values of the Enable Registers
Status Node
Operation
Questionable
:SYSTem:ERRor
The :SYSTem:ERRor query returns the next error number and error descrip-
tion in the error queue over the interface. This instrument has an error queue
100 errors deep and operates on a first-in, first-out basis. Repeatedly sending
the query :SYSTEM:ERROR? returns the error numbers and descriptions in
the order in which they occur until the queue is empty. Any further queries
returns "+0,No errors" until another error occurs. Refer to Table 4-6 for the
error numbers and descriptions.
HP-IB and RS-232
:SYSTem:ERRor?
Preset Value
0
0
Programming
Standard SCPI Commands
4-25
Advertisement
Table of Contents
