Table of Contents
Advertisement
W A R N I N G
W A R N I N G
W A R N I N G
W A R N I N G
W A R N I N G
General Safety Considerations
This product has been designed and tested in accordance with IEC Publica-
tion 1010, Safety Requirements for Electronic Measuring Apparatus, and has
been supplied in a safe condition. The instruction documentation contains
information and warnings which must be followed by the user to ensure safe
operation and to maintain the product in a safe condition.
This is a Safety Class I product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall only be
inserted in a socket outlet provided with a protective earth contact.
Any interruption of the protective conductor inside or outside of the
instrument is likely to make the instrument dangerous. Intentional
interruption is prohibited.
No operator serviceable parts inside. Refer servicing to qualified
personnel. To prevent electrical shock, do not remove covers.
If this product is not used as specified, the protection provided by the
equipment could be impaired. This product must be used in a normal
condition (in which all means for protection are intact) only.
For continued protection against fire hazard, replace line fuse only
with same type and rating (type 2A/250V). The use of other fuses or
materials is prohibited.
On Option 002 dual input instruments, any light on an
unselected "A" channel will likely be output on one of the
unselected "B" channels.
On Option 002 dual input instruments, any light on an
unselected "B" channel will likely be output on an unselected
"A" channel.
To avoid exposure to light energy, always cover all unused channels.
General Safety Considerations
iii
Advertisement
Table of Contents
