Command Syntax: :STATus:<node>:ENABle<value>
Where:
Example:
Query Syntax:
Returned Format: <value>
Where:
Example:
Usage:
Query Syntax:
Returned Format: <value>
Where:
Example:
Programming
Standard SCPI Commands
<node> = OPERation | QUEStionable
<value> ::= 0 to 32767 (integer or floating point – NR1)
OUTPUT 711;":STATUS:QUESTIONABLE:ENABLE 1024"
:STATus:<node>:ENABle?
<node> = OPERation | QUEStionable
<value> ::= 0 to 32767 (integer – NR1)
OUTPUT 711;":STATUS:QUESTIONABLE:ENABLE?"
ENTER 711;Value
PRINT Value
:STATus:<node>[:EVENT]
The :STATus:<node>[:EVENT] query returns the value of the event register
for the node. Event registers have no function in this instrument, but the
query is included for compatability with the SCPI standard. This query always
returns the value 0.
HP-IB only
:STATus:<node>[:EVENT?]
<value> = 0 (integer – NR1)
<node> = OPERation | QUEStionable
OUTPUT 711;":STATUS:OPERATION:EVENT?"
ENTER 711;Value
PRINT Value
4-24