Siemens POS8.4420/109 Basic Documentation page 61

391 1 16 UPS -
User
Presenc
e Switch
A6V11471220_en--_e
SystemClock 52 1 U8[r4U4][r3U5][
Setting U3U5][r2U6][r2
U6]B16 /
DPT_DateTime
DPT_ID =
19.001
Interface 1 1 U16 /
PDT_UNSIGNE
Object type
D_INT
ObjectIndex 29 1
PresenceStat DPT_Occupanc
51 1
us y
PresenceStat 15 1 DPT_Bool
usLocked 5
PresenceStat 20 1 DPT_Occupanc
usEff 1 y
Apartment 10 1 U8Z8 /
1 DPT_UcountVa
lue8_Z
Room 10 1 U8Z8 /
2 DPT_UcountVa
lue8_Z
Subzone 10 1 U8Z8 /
3 DPT_UcountVa
lue8_Z
This input signal is
used by SCLO slave
to synchronise its local
clock: i.e.
SystemClock
information is copied
to LocalClock.
R W.re SystemClockSetting
q refers to the process
input property of ABI
SCLO to write the
master clock via a PL-
Link peripheral device.
• Input
SystemClockSetting
can be accessed using
LTE Write service and
broadcast addressing
or individual property
addressing.
• [cASA-4.2-050-N]
Implementation of
input
SystemClockSetting is
optional.
If implemented, the
input shall be activated
/ deactivated by the
engineered
configuration
parameter
EnableSystemClockSe
tting of ABI SCLO.
[end-cASA-4.2-050-N]
• [cASA-4.0]
This process signal
will not be
implemented in a 1st
step since there is no
real use case to adjust
date & time
information of the BA
Device via PL-Link.
[end-cASA-4.0]
R ----
R Rea
d.ind
IR.re
R
q
RW W-
ind
R IR.in
d
RW ----
RW ----
RW ----
10
Appendix
Object list
=> KNX Standard,
chapter 7/1/1, FB
System Clock, clause
Input
SystemClockSetting
=> [T022.S032-2I015]
Setting of Local-Date
and -Time via Room
Unit
61 | 70