Siemens POS8.4420/109 Basic Documentation page 45

Alarm notification
A6V11471220_en--_e
When an event comes in, e.g., event number 1236, the following is displayed.
The screen blinks until it gets acknowledged.
Press any button to enter the next page:
Note: stands for type 1: Alarm notification. When a new alarm comes in, it
overrides the existing one. The screen continues to show type 1.
Press button 3 or 7 to go to the following page.
Then press button 5 to send a request to the controller to acknowledge all alarms.
The following is displayed while waiting for the feedback from the controller.
9
Operation
Notification page
45 | 70