Sony Vaio PCG-GR114EK Instruction & Operation Manual page 65

Connecting peripheral devices
Attaching your computer to the port replicator
To attach your computer to the port replicator, proceed as follows:
1 Turn off the computer and disconnect all peripherals.
2 Plug the cable attached to the AC adapter (1) into the DC In port (2) on the port replicator (3).
3 Plug the power cord (4) into the AC adapter and an AC outlet.
The power indicator DC IN (5) of the port replicator turns green.
4 Close the tilt stands before attaching the notebook to the port replicator.
n N
64