Philips FW-C90 User Manual page 7

All manuals and user guides at all-guides.com
CAUTION:
– For optimal sound performance, it is
recommended to use the supplied
speakers.
– Do not connect more than one speaker
to any one pair of + / - speaker
terminal.
– Do not connect speakers with
impedance lower than the speakers
supplied. Please refer to
SPECIFICATION section of this manual.
D Line Out Connection
(wireless
ready)
You can connect the audio left and right
LINE OUT terminals to a optional CD
Recorder ANALOG IN terminals. This
allows you to record in an analogue format.
You can also install additional optional
front active speakers away from the
system (e.g. in another room) to reduce the
inconvenience of running long speaker
wires across rooms. You can place as many
remote speakers as you like provided they
operate at the same radio frequency.
Connect the wireless radio frequency
transmitter to the LINE OUT terminals.
Place the active speakers at your preferred
location. Be sure to follow the instructions
supplied with the active speakers.
pg 01-29/C90/22-Eng 7
Note:
G Digital Out Connection
– Availability of wireless transmitter and
You can record the digital sound from the
its peripherals are subjected to the
CD, through this output, on any audio
approval of local authorities. Please
equipment with digital input (e.g. CD
check with respective local safety or
Recorder, Digital Audio Tape (DAT) deck,
approving authority.
Digital to Analog Converter and Digital
Signal Processor).
E Connecting other
Connect one end of the cinch cable (not
equipment to your system
supplied) to the DIGITAL OUT socket and
You can connect the audio left and right
the other end to the audio equipment with
OUT terminals of a TV, VCR, Laser Disc
digital input.When connecting the cinch
player, DVD player or CD Recorder to the
cable, make sure it is fully inserted.
AUX/CDR IN terminals at the rear of the
system.
H AC Power Supply
After all other connections have been
F Subwoofer Out Connection
made, connect the AC power cord to the
Connect the optional active subwoofer to
system and to the wall outlet.
the SUBWOOFER OUT terminal. The
subwoofer reproduces just the low bass
sound effect (e.g. explosions, the rumble of
spaceships, etc.). Be sure to follow the
instructions supplied with the subwoofer.
PREPARATION
Inserting batteries into the
Remote Control
• Insert the batteries (Type R06 or AA)
into the remote control as shown in the
battery compartment.
• To avoid damage from possible battery
leakage, remove dead batteries or
batteries that will not be used for a long
time. For replacement, use type R06 or
AA batteries.
3/6/00, 1:52 PM
7
3139 116 19701