Philips FW-C90 User Manual page 14

All manuals and user guides at all-guides.com
OPERATING THE SYSTEM
• Press BASS 3 or 4 to select the low
tone level.
™ "BASS -X or BASS +X" will be
displayed.
• Press TREBLE 3 or 4 to select the
high tone level.
™ "TREBLE -X or TREBLE +X"
will be displayed.
Note:
– " X " denotes the sound level.
DYNAMIC BASS BOOST (DBB)
There are three DBB settings to enhance
the bass response.
• Press DYNAMIC BASS BOOST briefly
to select a bass boost level.
™ The display lights up.
DBB
™ "BEAT", "PUNCH" or "BLAST" will
be displayed.
To switch off DBB
• Press DYNAMIC BASS BOOST briefly
until "DBB OFF" is displayed.
Notes:
– When Personal or Bass/Treble sound
control is selected, DBB will be
switched off automatically.
– Some CDs or tapes might be recorded in
high modulation, which causes a
distortion at high volume. If this occurs,
switch off DBB or reduce the volume.
14
pg 01-29/C90/22-Eng 14
Automatic DSC-DBB / VEC-DBB
selection
The best DBB setting is generated
automatically for each DSC or VEC
selection. You can manually select the DBB
setting that best suits your listening
environment.
3/6/00, 1:53 PM
3139 116 19701