Philips FW-C90 User Manual page 12

All manuals and user guides at all-guides.com
OPERATING THE SYSTEM
Switching the system ON
• Press CD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT PLAY
buttons.
Switching the system to
standby mode
• Press STANDBY ON or B on the
remote control.
™ The system will switch to standby
mode.
Switching the system to power
save mode
(when Demonstration mode
is stopped)
• Press POWER SAVE to switch to
energy saving mode ( < 2 watts ).
™ "LOW POWER STANDBY ON" will
be displayed, after which the display
screen goes blank.
™ The low power STANDBY ON LED
will be lit.
Note:
– if the demonstration mode has not been
disabled, it will resume 5 seconds later.
12
pg 01-29/C90/22-Eng 12
Selecting the Source Dim mode
You can select the desired brightness for
• Press the respective source selection
the display.
button: CD, TUNER, TAPE or AUX.
™ The display indicates the selected
• Press DIM to select DIM 1, DIM 2, DIM
source.
3 or DIM OFF display mode.
™ The
Note:
™ "DIM 1", "DIM 2", "DIM 3" or
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DIM OFF - normal brightness with
DVD player or CD Recorder) to the AUX/
Spectrum Analyzer On
CDR IN terminals.
DIM 1 - normal brightness with
Spectrum Analyzer Off
DIM 2 - half brightness with Spectrum
Analyzer On
DIM 3 - half brightness with Spectrum
Analyzer Off and all LEDs on the
system will be switched off.
appears on the display.
DIM
"DIM OFF" will be displayed
Volume Control
depending on the mode selected.
Adjust VOLUME to increase or decrease
the sound level.
For Personal Listening
Connect the headphones plug to the n
socket at the front of the system. The
speakers will be muted.
MUTE (only on remote control)
This feature allows you to temporarily
switch off the sound without switching off
the system when you require a moment of
silence.
1 Press MUTE on the remote control to
switch off the sound.
™ "MUTE" will be displayed.
2 Press MUTE again on the remote
control or increase the VOLUME level
to switch on the sound.
3/6/00, 1:53 PM
3139 116 19701