Philips FW-C90 User Manual page 24

All manuals and user guides at all-guides.com
RECORDING
Dubbing tapes
(from tape deck 1 to
tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load the prerecorded tape into tape
deck 1 with full spool to the left and a
blank tape into tape deck 2 with full
spool aside.
3 Press í or ë to select the recording
tape side (see Tape Side under TAPE
section) .
4 Press DUB (HSD) once for normal
speed dubbing or twice (within 2
seconds) for high speed dubbing.
™ "NORMAL" (normal speed) or
"FAST" (high speed) will be
displayed, followed by "DUB" with "!
or @" scrolling left or right depending
on the tape side selected.
™ The appears on the display
HSD
during high speed dubbing.
• Dubbing will start immediately.
™ The starts flashing.
REC
5 Press Ç to stop dubbing.
Notes:
– Only å å å å å mode is available during
dubbing.
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of
the same length.
24
pg 01-29/C90/22-Eng 24
– During high speed dubbing in Tape
One Touch Recording
mode, the sound is reduced to a low
• For One Touch Recording, as soon as you
volume.
press RECORD, the current source (CD,
– You can listen to another source while
TUNER or AUX) will be recorded on tape
dubbing.
deck 2.
– Dolby B NR button has no influence
during dubbing (dubbing from tape deck
1 Load a blank tape in tape deck 2.
1 to tape deck 2). An original tape
2 Press RECORD to start recording.
recorded with Dolby B NR automatically
™ The
produces a copy with Dolby B NR.
3 Press Ç to stop recording.
Note:
CD Synchro Start Recording
– When you press RECORD while in TAPE
mode, " SELECT SOURCE " will be
1 Load a blank tape into tape deck 2 and a
disc into a disc tray.
displayed. One Touch Recording is not
2 Press CD to select CD mode.
possible in TAPE mode.
• You can program the tracks in the order
you want them to be recorded (see
Programming Tracks). If not, select the
disc by pressing CD (CD 1•2•3) and the
tracks are recorded according to the
order on the selected disc.
3 Press RECORD to start recording.
™ The starts flashing.
REC
• CD will start playback automatically.
4 Press Ç to stop recording.
starts flashing.
REC
3/6/00, 1:54 PM
3139 116 19701