Recording - Philips FW-C90 User Manual

All manuals and user guides at all-guides.com
MINI HIFI SYSTEM
STANDBY
ON
POWER SAVE
IR SENSOR
CD 1•2•3 BAND
C1 • 2 • 3 BAND
CD TUNER
SEARCH•TUNING STOP•CLEAR PLAY PAUSE
CLOCK/
PROG DIM
TIMER
DYNAMIC BASS BOOST
BASS
pg 01-29/C90/22-Eng 23
Notes:
– It is not possible to change tape side
DOLBY B NR
– For recording, use only tape of IEC type I
NEWS/TA
RDS
– The tape is secured at both ends with
TAPE 1•2 CDR/DVD CD TEXT
TAPE AUX CDR
PRESET
PREV SIDE NEXT
– The recording level is set automatically,
DUB
A. REV RECORD
(HSD)
TREBLE
– To prevent accidental recording, break
– If " CHECK TAPE " is displayed, the
Digital Recording via Digital
Out
For CD digital recording, please refer to the
Instructions Manual of the CD Recorder,
digital audio equipment, etc.
Recording from other sources
(only on tape deck 2)
during recording.
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
(normal tape) or IEC type II (Cr0 2 ).
2 Load a blank tape into tape deck 2 with
the open side downward.
leader tape. At the beginning and end of
3 Press í or ë to select the recording
tape, nothing will be recorded for six to
tape side (see Tape Side under TAPE
seven seconds.
section) .
4 Press DOLBY B NR to record with
regardless of the position of Volume,
Dolby B NR.
DBB, DSC, etc.
5 Press CD, TUNER or AUX.
Dolby B NR can be selected for Tuner or
• Start playback of the selected source.
CD recording.
6 Press RECORD to start recording.
™ The
out the tab on the left shoulder of the
7 Press Ç to stop recording.
tape side you want to protect.
Notes:
– Only å å å å å or ∂
protection tab has been broken. Put a
piece of clear adhesive tape over the
during recording .
opening. Do not cover the Cr0 2 tape
– During recording, it is not possible to
detection hole when covering the tab
listen to another source.
opening.
3/6/00, 1:53 PM

RECORDING

starts flashing.
REC
∂ mode is available ∂ ∂
∂
23
3139 116 19701