Sony NEX-FS100E Operating Manual page 88

Saving images with a computer (Continued)
Computer]), then double-click
[SONYCMU(E:)] (CD-ROM).
4 Select the language for the application
to be installed, then click [OK].
5 When the install wizard screen appears,
click [Next].
6 Confirm the license agreement, and if
you accept the terms, click [Next].
7 Select the drive or folder to install the
application, then click [Next].
8 Select the option to create the desk-top
shortcut, then click [Next].
9 Turn on your camcorder, then connect
the camcorder to the computer using the
supplied USB cable.
The [USB CONNECT] screen appears
on the camcorder screen automatically.
qa Click [Next].
qs Follow the on-screen instructions to
install the software.
• Restart the computer if required to complete
the installation.
When the installation is completed, the
following icon will appear, depending
on the selection in step 8.
88
USB cable
(supplied)
qd Remove the CD-ROM from the
computer.
To disconnect your camcorder from
the computer
1 Click the icon at the bottom right of
the desktop of the computer t [Safely
remove USB Mass Storage Device-
Drive].
t [YES] on the camcorder
2 Touch
screen.
3 Disconnect the USB cable.
b Notes
• Use the supplied "Content Management Utility"
software when you import long movies or edited
images from the camcorder to a computer. If
you use other software, the images may not be
imported correctly.
• If file size exceeds 2 GB during a long
recording, a new file is created automatically,
resulting in the movie being divided into
multiple files when you view the recording
media directly from your computer after
recording.
• The camcorder automatically divides an image
file that exceeds 2 GB or larger and saves the
parts as separate files. All image files may be
shown as separate files on a computer, however,
the files will be handled properly by the import
function of the camcorder or the "Content
Management Utility" software.