About The "Infolithium" Battery Pack - Sony NEX-FS100E Operating Manual

On image data compatibility
• Image data files recorded on a memory card by
your camcorder conform to the "Design rule for
Camera File system" universal standard
established by the JEITA (Japan Electronics and
Information Technology Industries
Association).
• On your camcorder, you cannot play back still
images recorded on other devices (DCR-
TRV900E or DSC-D700/D770) that do not
conform to the universal standard. (These
models are not sold in some regions.)
• If you cannot use the memory card that has been
used with another device, format it with your
camcorder (p. 63). Note that formatting erases
all information on the memory card.
• You may not be able to play back images with
your camcorder:
– When playing back image data modified on
your computer.
– When playing back image data recorded with
other devices.
About the "Memory Stick" media
Types of "Memory Stick" media
"Memory Stick Duo" media
(with MagicGate)
"Memory Stick PRO Duo"
media (Mark2)
"Memory Stick PRO-HG Duo"
media
• This product supports parallel data transfer.
However, the transfer speed may differ,
depending on the type of media you use.
• This product cannot record or play data that uses
"MagicGate" technology. "MagicGate" is a
copyright protection technology that records and
transfers the contents in an encrypted format.
About the "InfoLITHIUM"
battery pack
Your camcorder operates only with an
"InfoLITHIUM" L series battery pack of a
large capacity, such as NP-F770 (supplied)
and NP-F970 (sold separately). You cannot
use NP-F570.
"InfoLITHIUM" L series battery packs
have the
What is an "InfoLITHIUM" battery
pack?
An "InfoLITHIUM" battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your
camcorder and a supplied AC Adaptor/
Charger.
The "InfoLITHIUM" battery pack displays
the remaining battery time in % according
to the operating situations of your
camcorder.
Recording
/Playback
To charge the battery pack
_
• Be sure to charge the battery pack before you
start using your camcorder.
a
• We recommend charging the battery pack in an
ambient temperature of from 10 °C to 30 °C (50
°F to 86 °F) until the charge lamp of the AC
*
Adaptor/Charger turns off. If you charge the
battery pack outside of this temperature range,
you may not be able to charge it efficiently.
To use the battery pack effectively
• Battery pack performance decreases when the
ambient temperature is 10 °C (50 °F) or below,
and the length of time you can use the battery
pack becomes shorter. In that case, do one of the
following to use the battery pack for a longer
time.
– Put the battery pack in a pocket to warm it up,
and install it in your camcorder right before
you start taking shots.
– Use a large capacity battery pack: NP-F970
(sold separately).
• Be sure to set the POWER switch to OFF when
not recording or playing back on your
camcorder. The battery pack is also consumed
mark.
Continued ,
105