Sony NEX-FS100E Operating Manual page 57

b Notes
• Output resolution depends on the settings of [HDMI/COMPONENT].
[HDMI/
HD/SD COMPONENT]
setting
HD
SD
• Use an HDMI cable with the HDMI logo.
• Images are not output from the HDMI OUT jack of your camcorder, if copyright protection signals are
recorded in the movies.
• Images and sounds may not be reproduced correctly on some monitors or TVs.
• Do not connect the output jacks of the camcorder with the output jacks of the monitor or TV. A
malfunction may be caused.
• When 25p of frame rate is selected in [
interlace signals by the pull-down system to be output.
• During recording with [
or 576p signals. Therefore, if [HDMI/COMPONENT] is set to [720p/576i] or [576p], the screen of the
connected device becomes blank, until you change the setting.
• If you display the edit screen while outputting signals to a TV or monitor, the menu may not be displayed
correctly.
• This camcorder is not compatible with "BRAVIA" sync.
z Tips
• HDMI (High-Definition Multimedia Interface) is an interface to send both video/audio signals. The
HDMI OUT jack outputs high quality images and digital audio.
If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR)
Use a 21-pin adaptor (commercially available) to view playback images.
HDMI OUT
1080p/576i 1080p
720p/576i
1080i/576i 1080i
576p
576i
1080p/576i
720p/576i
1080i/576i
576p
576i
REC FORMAT], progressive signals are converted to
REC FORMAT] set to [1080/50p PS], the camcorder does not output 720p
Output resolution
COMPONENT OUT
1080p
720p 720p
1080i
576p 576p
576i 576i
576i 576i
576i 576i
576i 576i
576p 576p
576i 576i
TV/VCR
VIDEO OUT
576i
576i
576i
576i
576i
576i
576i
576i
576i
576i
57