Sony NEX-FS100E Operating Manual page 81

If data on your current location cannot
be obtained
When you cannot obtain your current
location, a display that allows you to
triangulate the location again appears.
In this case, follow the instructions that
appears on the LCD screen.
To obtain your current location
manually
Touch [Update] to triangulate the location.
To close the triangulating information
screen
Touch .
AUTO CLOCK ADJ
The camcorder can maintain accurate time
automatically by acquiring time
information from the GPS system.
B ON
Maintains accurate time automatically.
OFF
Does not maintain accurate time using the
GPS system.
b Notes
• You must set the date and time on your
camcorder before using your camcorder (p. 21).
• There may be discrepancies of a few seconds
even if [AUTO CLOCK ADJ] is activated.
• This function automatically adjusts the clock
when the camcorder receives GPS signals and
finishes triangulating successfully while the
power is on. Once the clock is adjusted, it will
not be adjusted until the next time you turn the
camcorder on again.
• The clock may not be adjusted to the correct
time automatically using the GPS system,
depending on the country/region selected for
your camcorder. In this case, set [AUTO
CLOCK ADJ] to [OFF].
AUTO AREA ADJ
The camcorder can compensate for time
differences automatically by acquiring
location information from the GPS system.
B ON
Compensates for time differences
automatically.
OFF
Does not compensates for time differences
automatically.
b Notes
• You must set the date and time on your
camcorder before using your camcorder (p. 21).
• There may be discrepancies of a few seconds
even if [AUTO AREA ADJ] is activated.
• The camcorder may not compensate for the time
difference automatically, depending on the
country/region selected for your camcorder. In
this case, set [AUTO AREA ADJ] to [OFF].
DATE REC
B OFF
Does not superimpose the date and time on
images.
ON
Superimposes the date and time on images.
z Tips
• You can set this item when the interlace
scanning system is selected.
• When zebra or peaking is activated, the date and
time characters are affected by the signal, but
properly recorded on images.
BEEP
B OFF
Cancels the melody.
ON
Activates a melody when you start/stop
recording, or when you are warned with
warning indicators, etc.
81