Remote Condenser - Scotsman C0522 Installation And User Manual

C0522 through C1030
Remote Condenser Models - User Manual

Remote condenser

The condenser fins will need to be cleaned.
Push and release the Off button. Wait until the
machine stops.
Note: Lock out the controller or the ice machine
power supply to prevent an unauthorized fan motor
restart.
If there is imbedded grease, use a commercial coil
cleaner to wash out the grease. Dust can be blown
out with compressed air from the inside or use a
vacuum cleaner and soft brush. Be careful not to
damage the condenser's fins. Use a fin comb to
straighten any bent fins.
Exterior Panels
The front and side panels are durable stainless
steel. Fingerprints, dust and grease will require
cleaning with a good quality stainless steel cleaner.
The top panel is plastic, wipe it off with a damp
cloth to remove dust and dirt.
Water filters
If the machine has been connected to water filters,
check the cartridges for the date they were
replaced or for the pressure on the gauge. Change
cartridges if they've been installed more than 6
months or if the pressure drops too much when the
ice machine fills with water.
July 2006
Page 23