Sleep Timer - Philips FW-P78 Manual

All manuals and user guides at all-guides.com
TIMER
5 Press CLOCK/TIMER to store the start
time.
™ The timer is now set.
™ The remains on the display.
TIMER
• At the preset time, the timer will be
activated.
™ The selected source will be played.
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
– If the source selected is TUNER, the last
tuned frequency will be switched on.
– If the source selected is CD, playback
will begin with the first track of the
selected disc or program. If the CD trays
are empty, TUNER will be selected
instead.
– If the source selected is TAPE, and if the
preset time is reached during high
speed dubbing, the TUNER will be
selected instead.
– The timer will not activate if a recording
is in progress.
Untitled-2 25
To switch off the TIMER
1 Press and hold CLOCK/TIMER for more
than 2 seconds .
2 Press Ç on the system to cancel the
timer.
™ The timer is now switched off.
™ The display will show "OFF" and the
disappears.
TIMER
To start the TIMER again (for the same
preset time and source)
1 Press and hold CLOCK/TIMER for more
than 2 seconds .
2 Press CLOCK/TIMER again to store the
start time.
™ The timer is now on.
™ The appears on the display.
TIMER

SLEEP TIMER

Sleep Timer
(only on remote control)
This feature allows you to select a length
of time after which the system will switch
to the standby mode automatically.
1 Press SLEEP TIMER on the remote
control repeatedly to select a period of
time.
™ The selections are as follows (time in
minutes):
60 ™ 45 ™ 30 ™ 15 ™ OFF ™
60 ...
™ "SLEEP XX" or "OFF" will be
displayed. "XX" is the time in
minutes.
2 When you reach the desired length of
time, stop pressing the SLEEP TIMER
button.
™ After this amount of time passes, the
system will switch to the standby
mode.
To switch off the Sleep Timer
• Press SLEEP TIMER repeatedly until
"OFF" is displayed, or press the
STANDBY ON button.
6/8/01, 10:13 AM
25
3139 116 19782