Tuner - Philips FW-P78 Manual

All manuals and user guides at all-guides.com

TUNER

MINI HIFI SYSTEM
PROGRAM SHUFFLE
REPEAT REC
TIMER
NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 1KHz
STANDBY
ON
CLOCK/
TIMER CD1 • 2 • 3 BAND
CD TUNER
PROG
SEARCH • TUNING STOP • CLEAR
SOUND NAVIGATION
DIGITAL SOUND
CONTROL
Note:
– For 'EASY SET' feature, please refer to
page 13.
Tuning to radio stations
1 Press TUNER (BAND) to select TUNER
mode.
™ "TUNER" will be displayed.
A few seconds later, the current radio
frequency will be displayed.
2 Press TUNER (BAND) again to select
the desired waveband : FM or MW.
3 Press à or á for more than one
second, then release.
™ The display will show "SEARCH"
until a radio station with sufficient
signal strength is found.
18
Untitled-2 18
C
STEREO
L R
BACK
FRONT
HSD
PRO LOGIC
2KHz 4KHz 8KHz
S S
TAPE 1 • 2 CDR / VIDEO
TAPE AUX
A.REV
SIDE A•B PRESET
PLAY PAUSE PREV SIDE NEXT
MIC
LEVEL
DYNAMIC BASS
MIC
BOOST
Notes:
• Repeat this procedure until the desired
– You can cancel the automatic
station is reached.
• To tune to a weak station, briefly press
à or á repeatedly until the display
– If you want to reserve a section of
shows the desired frequency and/or
when the best reception has been
obtained.
Storing Preset Stations
You can store up to 40 radio stations in the
Manual programming
memory. When a preset radio station is
1 Press TUNER (BAND).
selected, the preset number appears next
2 Press TUNER (BAND) again to select
to the frequency on the display.
3 Press PROG for less than one second.
Automatic programming
1 Press TUNER (BAND).
2 Press PROG for more than one second.
™ The
starts flashing and
PROGRAM
"AUTO" will be displayed.
4 Press à or á to tune to the desired
™ The system will search for every
available radio station in the FM frequency.
waveband first, then search the MW • If you wish to store the radio station to
another preset number, press 4 or 3 to
waveband.
™ All available stations will be stored
select the desired preset number.
automatically. The frequency and 5 Press PROG again.
preset number will be displayed ™ The
briefly. radio station will be stored.
™ The system will stop searching when
• Repeat steps 3 – 5 to store other preset
all the available radio stations are
radio stations.
stored or when the memory for 40
Notes:
preset radio stations is used.
– When 40 radio stations are stored and
™ The system will remain tuned to the
you attempt to store another radio
last stored preset radio station.
station, the display will show " FULL ".
If you want to change an existing preset
number, repeat steps 3 – 5.
programming by pressing PROG or Ç
– You can cancel manual programming by
(on the system only).
pressing Ç (on the system only).
– During programming, if no button is
preset numbers, for example preset
pressed within 20 seconds, the system
numbers 1 to 9, select preset 10 before
will exit program mode automatically.
starting automatic programming, only
the preset numbers 10 to 40 will be
Tuning to Preset Radio
programmed.
Stations
• Press 4 or 3 to select the desired
preset number.
™ The preset number, radio frequency,
the desired waveband : FM or MW.
and waveband appear on the display.
™ The starts flashing.
PROGRAM
™ The next available preset number will
be displayed for selection.
6/8/01, 10:13 AM
disappears and the
PROGRAM
3139 116 19782