Table of Contents
Advertisement
管 管 管 管 路 路 路 路 连 连 连 连 接 接 接 接
4.3
Connections
To remove the sealing plugs, press the locking ring inwards and gently remove plug.
拔出密封塞 -
向里压下锁紧环并向外拔出塞子。
Locking ring
锁紧环
IMPORTANT!
重 重 重 重 要 要 要 要
• • • •
Connect green feed water tube to feed water supply and connect other end to system fitting marked
"feed water inlet"
将绿色软管的一端连接到供水点，另一端连接到纯水机标有"feed water inlet" 的进水口。
• • • •
Connect white Type III tube to system fitting marked "Type III Water" and connect other end of tube to
ball cock valve provide.
将白色 III 类水软管的一端连接到纯水机标有"Type III water" 的出水口，软管的另一端安装上一个厂家
提供的球阀。
• • • •
Connect transparent tube to system fitting marked "Overflow" and run other end of tube to drain. Make
sure to maintain air gap between end of tube and drain.
将透明软管的一端连接到纯水机标有"Overflow" 的出水口上，软管的另一端作为排放口，要使软管的排
放口与地漏口保持一定的距离。
• • • •
(Insert all tubes to stop position in fittings. Tube should bottom in fitting as pushed in.)
所有的软管都要插到位，插到底。
• • • •
Connect the equipment to a power supply.
插上纯水机的电源插头。
LaboStar 7 TWF DI and UV
Ultra pure water system
Catalog no. 2231 & 2232
Depress locking ring
压下锁紧环
Sealing plug
密封塞
13061776706@163.com
Page 13 of 26
Advertisement
Table of Contents
