Tool Use And Set Up; Power On; Selecting A Counter - Stanley PB2500 Instruction Manual

Tool use and Set up

1. Power ON

Pull trigger and release.
Power On and shows "Stanley Engineered
Fastening" logo on the screen.
After showing logo for a few seconds, the
screen is switched to Counter window
automatically.
*Power OFF for 3 minutes automatically after
trigger was pulled or the screen was touched
last.

2. Selecting a counter

Various counters can be used. By referring to the following descriptions, Switch
ON/OFF these counters accordingly.
・Poka-Yoke : Use this as Poka-Yoke counter
・Service1 : Use this as Free counter
・Service2 : Use this as Free counter
・Service3 : Use this as Free counter
・Mandrel : Use this as Alarm to empty collector (Default 100)
・JAW : Use this as Alarm to do Jaw maintenance (Default 3,000)
・OVERHAUL : Use this as Alarm to overhaul (Default 50,000)
・Daily : You can see the numbers set per day
・Monthly : You can see the numbers set per month
・Total : You can see the total numbers set
- 10 -