Sony RDR-HX820 Operating Instructions Manual page 91

16 : 9
4:3 Letter Box
4:3 Pan Scan
b
Note
Depending on the disc, "4:3 Letter Box" may be
selected automatically instead of "4:3 Pan Scan" or
vice versa.
HDMI Resolution
Selects the type of video signals output from
the HDMI OUT jack. When you select
"Auto" (default), the recorder outputs video
signals of the highest resolution acceptable
for your TV. If the picture is not clear, natural
or to your satisfaction, try another option that
suits the disc and your TV/projector, etc. For
details, refer also to the instruction manual
supplied with the TV/projector, etc.
Auto
Normally, select this.
1920×1080i Sends 1920×1080i video
signals.
1280×720p Sends 1280×720p video
signals.
720×480/ Sends 720×480/576p video
576p signals.
b
Note
Even when a setting other than "Auto" is selected
and the connected TV cannot accept the resolution,
the recorder automatically adjusts the video signals
that are suitable for the TV.
4:3 Output
This setting is effective only when you set
"TV Type" of "Video Output" to "16 : 9" in
the "Video" setup.
Adjust this setting to watch 4:3 aspect ratio
signals. If you can change the aspect ratio on
your TV, change the setting on your TV, not
this recorder.
Note that this setting is effective only for
HDMI connection.
Full Select this when you can
change the aspect ratio on
your TV.
Normal
Select this when you cannot
change the aspect ratio on
your TV. Shows a 4:3 size
video with the aspect ratio as
it is.
16:9 aspect ratio TV
Component Out
Selects whether or not to output video signals
from the COMPONENT VIDEO OUT jacks.
On
Outputs the component video
signals. Select this when you
want to view progressive
signals.
Off
Outputs no signals.
b
Notes
• When you set "Line1 Output" of "Scart Setting"
to "RGB," you cannot set "Component Out" to
"On."
• When you connect the recorder to a monitor or
projector via only the COMPONENT VIDEO
OUT jacks, do not select "Off." If you select
"Off" in this case, the picture may not appear.
91
,continued