Hookups And Settings; Hooking Up The Recorder; Step 1: Connecting The Aerial Cable - Sony RDR-HX820 Operating Instructions Manual

Hookups and Settings

Hooking Up the Recorder

Follow steps 1 through 6 to hook up and adjust the settings of the recorder. Do not connect the
mains lead until you reach "Step 4: Connecting the Mains Lead" on page 17.
b
Notes
• See "Specifications" (page 109) for a list of supplied accessories.
• Plug in cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this recorder to a TV that does not have a SCART or video input jack.
• Be sure to disconnect the mains lead of each component before connecting.

Step 1: Connecting the Aerial Cable

Connect the aerial cable by following the steps below.
to AERIAL IN
to AERIAL OUT
1
Disconnect the aerial cable from your TV, and connect it to AERIAL IN on the rear
panel of the recorder.
2
Connect AERIAL OUT of the recorder to the aerial input of your TV using the supplied
aerial cable.
12
Aerial cable (supplied)
: Signal flow
TV
DVD recorder