Recording Tv Programmes Using The G-Code System - Sony RDR-HX820 Operating Instructions Manual

One Touch Timer
If you use the SMARTLINK connection, you
can easily display the timer programming
menu.
When the TV is turned on or in standby
mode, press TIMER. The recorder
automatically turns on and the TV's input is
switched to the recorder. The Timer
programming menu appears.
z Hint
If you are recording to the HDD or a DVD-RW (VR
mode) at a recording mode that is SP or lower and
is a 2x-speed or higher disc, you can play the title as
it is being recorded by selecting the programme title
on the Title List (page 60).
b
Notes
• If a message indicating that the disc is full appears
on the screen, change the disc, or make available
space for the recording (HDD/DVD+RW/DVD-
RW only) (page 68).
• Check that the clock is correctly set before setting
the timer recording. If not, the timer recording
cannot be made.
• To record a satellite programme, turn on the
satellite tuner and select the satellite programme
you want to record. Leave the satellite tuner
turned on until the recorder finishes recording. If
you connect equipment with a timer function, you
can use the Synchro Rec function (page 52).
• Even if the timer is set for the same daily or
weekly programme, the timer recording cannot be
made if it overlaps with a programme that has
priority. " " will appear next to the overlapped
setting in the Timer List. Check the priority order
of the settings.
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has
priority.
• The Rec Mode Adjust function only works with a
timer recording and the PDC/VPS function set to
off. It does not function with Quick Timer or
Synchro Rec. In addition, the Rec Mode Adjust
function does not work when recording to the
HDD while "Auto Title Erase" of the "Timer
Settings" is set to "On" in the "Recording" setup.
• The beginning of some recordings may not be
made when using the PDC/VPS function.
• You cannot extend the recording duration time
when "PDC/VPS" is set to "On."
Recording TV programmes
using the G-Code system
The G-Code system is a feature that
simplifies setting the timer. Just enter the
G-Code programming number listed in the
TV programme guide. The date, time, and
programme position of that programme are
set automatically.
Check that the programme positions are
correctly set in "Programme Setting" in the
"Basic" setup (page 85).
Number
buttons
z REC
x REC
STOP
1
Press TIMER.
2
Press m twice to select the third row,
and press ENTER.
TIMER
</M/m/,,
ENTER
47
,continued