Change The Switch Password - NETGEAR GS110EMX User Manual

8-Port Gigabit Ethernet Plus Switch with 2-Port 10G/Multi-Gig Uplinks GS110EMX
For more information, see Set up the switch in your network and power on the switch
on page 16.
11. Restore your computer to its original IP address.
12. Verify that you can connect to the switch with its new IP address:
a. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection.
b. Launch a web browser.
c. In the address field of your web browser, enter the new IP address of the switch.
The login page displays.
d. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.

Change the switch password

The default password to access the switch is password. We recommend that you change
this password to a more secure password. The ideal password contains no dictionary
words from any language and contains uppercase and lowercase letters, numbers, and
symbols. It can be up to 20 characters.
To change the password:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that
is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4. Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5. Select Maintenance > Change Password.
The Change Password page displays.
6. In the Old Password field, type the current password for the switch.
Install and Access the Switch in
Your Network
24 User Manual