JVC KW-XC8 Service Manual page 32

KW-XC828
Removing the side bracket assembly
1. Remove the eject cam plate spring.
2. Push the joint f' through the slot to remove the load
rack downward.
3. Move the eject cam limiter in the direction of the
arrow to release it from the boss g' of the side
bracket assembly and from the two joints h'.
4. Move the eject cam plate in the direction of the arrow
to release the joint i'.
CAUTION: When reassembling, confirm operation of
each part before reattaching the eject cam
plate spring.
Side bracket assembly
Boss g'
Joint h'
Side bracket assembly
Boss g'
Eject cam plate
1-28
(See Fig.35 to 39)
Eject cam limiter
Joint h'
Joint f'
Load rack
Fig.36
Joint i'
Fig.38
Eject cam plate spring
Side bracket assembly
Joint h'
Eject cam plate
Joint f'
Load rack
Fig.35
Boss g'
Eject cam limiter
Eject cam plate
Joint h'
Fig.37
Side bracket assembly
Joint i'
Fig.39