JVC KW-XC8 Service Manual page 24

KW-XC828
Removing the cassette hanger assembly /
cassette holder (See Fig.4 to 7)
1. Check the mode is set to EJECT. Push down the
front part of the cassette holder and move in the
direction of the arrow to release the joint c.
2. Move the rear part of the cassette hanger assembly
in the direction of the arrow to release it from the two
joint bosses d.
3. Release the holder stabilizer spring from the hooks e
and f, then pull out from the cassette hanger
assembly.
4. Bring up the rear side of the cassette hanger
assembly to release the joint g and h.
5. Pull out the cassette catch from the cassette hanger
assembly.
Cassette holder
assembly
Hook g
1-20
Cassette hanger assembly
Hook h
Fig.6
Cassette holder assembly
Side bracket
Joints c
Cassette holder assembly
Fig.4
Cassette stabilizer spring
Hook e
Fig.5
Cassette catch
Fig.7
Boss d
Cassette hanger
assembly
Boss d
Cassette hanger assembly
Hook f
Cassette hanger assembly
Cassette holder assembly