JVC KW-XC8 Service Manual page 29

Removing the gear base arm / gear base
link assembly (See Fig.25 to 27)
1. Move the gear base arm in the direction of the arrow.
2. Insert a slotted screwdriver to the gear base spring
under the gear base arm, and release the gear base
arm upward from the boss on the gear base
assembly.
3. Remove the gear base arm from the main chassis
while releasing the two joints s.
4. Move the gear base link assemby in the direction of
the arrow to release the two joints t.
REFERENCE: When reattaching the gear base arm,
make sure that the boss on the gear
base assembly is inside the gear base
spring.
Removing the FFC pad
1. Push each joint hook u of the FFC pad and remove
toward the bottom.
(See Fig.27 and 29)
Joint t
Gear base
Joint t
link assembly
Fig.25
Gear base spring
Fig.26
Gear base link assembly
Fig.27
KW-XC828
Gear base arm
Joints s
Hook u
FFC pad
Hook u
Gear base arm
Screwdriver
Gear base arm
FFC pad
1-25