Table of Contents
Advertisement
2. Turn the front left cooking zone knob
back to the 0 position and turn the rear
left cooking zone knob until it reaches
position 9. A prolonged beep will be
emitted.
3. Use the front left cooking zone knob to set
the required power: this knob now controls
both the cooking zones that are in use.
To deactivate the Multizone function:
Put both knobs back to the 0 position (off).
This function automatically divides
the power equally between both
zones that are in use.
Booster function
The booster function allows the
cooking zone to be activated at
maximum power for as long as 5
minutes. It can be used to bring a
large quantity of water to a boil
rapidly or to broil meat.
• Turn the knob clockwise to the P position
for two seconds and then release.
The display shows the
minutes, the Booster function will be
disabled automatically and cooking will
continue at power level 9.
Use
symbol. After 5
Only for some zones: the Booster function
is always enabled and has to be disabled
manually using the corresponding knob.
The Booster function has priority
over the heating accelerator
function.
Power control
The hob is fitted with a power control
module that optimises/limits consumption. If
the overall set power level exceeds the
maximum limit permitted, the electronic
circuit board will automatically manage the
power supplied by the hot plates.
The module tries to maintain the maximum
deliverable power levels. Levels set by the
automatic control will appear on the
display.
The flashing of a power level indicates that
it will be automatically limited to a new level
selected by the power control module.
Priority is given to the last zone set.
65
Advertisement
Table of Contents
