Nokia RM-51 Service Manual page 69

RM-51
Phoenix service SW
3. Click Add to add a new connection, and select if you want to create it manually or by using the Connection
Wizard.
In the following dialogs you will be asked to select settings for the connection. If you use the Wizard, connect
the tools and a phone to your PC and the wizard will automatically try to configure the correct connection.
4. Select Manual mode, and click Next to continue.
i For FLS-4S POS Flash Device, choose the following connection settings:
• Media: FBUS
• COM Port: Virtual COM Port used by FLS-4
Note: ALWAYS check this. Go to Windows -> Control Panel -> FLS Virtual Port -> Configuration.
9238460 (Issue 1)
Figure 39 Connections list
Figure 40 Select mode: Manual
Figure 41 FLS virtual port icon
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Nokia Customer Care
Page 3–23