Nokia RM-51 Service Manual page 119

RM-51
Disassembly and reassembly instructions
18. Earpiece can be removed by pushing it out from its guidance by using a Torx screwdriver. If it is necessary
to replace the Earpiece always use a new Earpiece Adhesive. Note the guide pin when re-assembling.
19. Use SRT-6 to disconnect the Flex Module carefully.
20. Remove the UI-Board Assy. Note: The UI-Board Assy and the Shield are only available as single spare parts.
They do not to be glued in after sales.
21. Remove the Engine Module.
9238460 (Issue 1) Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Nokia Customer Care
Page 5–9