Step 4: Easy Setup - Sony DAR-X1R Operating Instructions Manual

Step 4: Easy Setup

Make the basic adjustments by following the on-
screen instructions in "Easy Setup."
O RETURN
1
Turn on the system and your TV. Then
switch the input selector on your TV so that
the signal from the recorder appears on
your TV screen.
The initial settings message appears.
• If this message does not appear, select "Easy
Setup" from "SETUP" in the System Menu
("Settings and Adjustments" on page 112).
2
Press .
Follow the on-screen instructions to make the
following settings.
Easy Setup - OSD
Select a language for the on-screen displays.
Easy Setup - Tuner System
Select your country/region or language.
The programme position order will be set
according to the country/region you set.
To set the programme positions manually, see
page 112.
• If you live in a French speaking country that
is not listed on the display, select "ELSE -
English."
Plus+ service only)
Enter your postal code using the number
buttons or </M/m/,, and press
To erase a number, move the cursor to the
number.
Note that the option for entering your Postal
Code only appears if you select one of the
[/1
following tuner systems in the step above:
UK, B, NL, D, E, I, CH, A.
For details on the tuner system, see page 112.
The recorder will automatically search for a
clock signal. If a clock signal cannot be found,
TV GUIDE
set the clock manually using </M/m/,, and
press
</M/m/,,
If you have a wide-screen TV, select "16:9." If
you have a standard TV, select either "4:3
Letter Box" (shrink to fit) or "4:3 Pan Scan"
(stretch to fit). This will determine how "wide-
screen" images are displayed on your TV.
If you are using the COMPONENT VIDEO
OUT jack, select "On."
If you plan to connect a decoder such as a
PAY-TV/Canal Plus analogue decoder to the
LINE 3/DECODER jack, select "Yes."
To output video signals, select "Video."
To output S video signals, select "S Video."
To output RGB signals, select "RGB."
Select "Video" to enjoy the SMARTLINK
features.
• If you set "Easy Setup - Component Out" to
• If you set "Easy Setup - Line3 Input" to
3
Press
"Easy Setup" is finished.
Easy Setup - Postal Code (areas with GUIDE
Easy Setup - Clock
.
Easy Setup - TV Type (page 117)
Easy Setup - Component Out
Easy Setup - Line3 Input
Easy Setup - Line1 Output
"On," you cannot select "RGB."
"Yes," you cannot select "S Video."
when "Finish" appears.
(Areas with GUIDE Plus+ service only)
To receive GUIDE Plus+ system data your
recorder must be turned off when not in
use. If your recorder is connected to a set
top box receiver, be sure to leave the set
top box receiver turned on. After initial
setup, it may take up to 24 hours to begin
receiving TV programme listings.
.
GB
,continued 27