Sony DAR-RH1000 Operating Instructions Manual page 18

5
Attach the cover.
Notes
• Set both speakers to the same height.
• You can install the front and surround speakers on
optional speaker stands (WS-FV20 or WS-FV11).
When detaching the speakers from their stands
Insert a flathead screwdriver (not supplied) into
the notch of the cover, and remove the cover from
the stand.
Flathead screwdriver
(not supplied)
Note
Detach the speaker carefully to prevent pinching your
fingers between the speaker and speaker stand.
18
To attach the supplied foot pads
If you are to place the centre speaker on a rack,
attach the supplied foot pads to the bottom of the
speaker. Make sure that the hole on the back of the
speaker is in the right direction, as illustrated
below.
Foot pad
z Hint
When placing the front speakers or the surround speakers
vertically, attach the supplied foot pads to the bottom
face of each speaker.