Sony DAR-RD100 Operating Instructions Manual page 30

2
Set the AMP/DVD switch to AMP, point the
remote at the centre unit, and press AMP
MENU.
The AMP menu appears.
3
Press M/m to select "SP SETUP" (speaker
setup), and press ENTER or ,.
Example:
4
Press M/m to select "SURR SP" (surround
speaker), and press ENTER or ,.
SL SR
5
Press M/m to select the setting for the
position.
If unsure about the position, see ""SURR SP"
(surround speaker)" on page 92.
6
Press < to return to the previous layer.
7
Press M/m to select "FRONT DIST" (front
speaker distance), and press ENTER or
,.
L R
8
Press M/m to set the front speaker
distance from the listening position.
The display changes in 0.2 m increments,
from 1.0 to 7.0 m. Enter the shorter distance if
the two speaker distances differ.
Example: When entering 5.8 m for the front
left and right speakers.
L R
9
Press < to return to the previous layer.
10
Repeat steps 7 to 9 to set "CEN DIST"
(centre speaker distance) and "SURR
DIST" (surround speaker distance).
30
GB
11
Press AMP MENU to turn off the AMP
menu.
To better adjust the speaker system
You can change the speaker level etc. See
"Speaker Level Settings ("LEVEL")" (page 93).
Basic hookups and settings are complete.
You are ready to start using the system.
m
m