Access The Internet - Zte MF60 Quick Manual

ZTE MF60 Quick Guide
Notes:
There will be a pop-up window to require the password.
SSID and preset password information.
password by selecting Settings > Wi-Fi Settings > Security after logging in the WebGUI Configuration
Page. You can restore the device to the factory default settings in case you forget it.
4. Wait a moment,
the connection between your device and the client will be established successfully.

Access the Internet

1. Switch on the device.
2. Establish a connection between your device and the client.
3. After successfully establishing the connection, access the Internet in the Always On and
Manual mode. The default mode is Always On.
Notes:
You can browse the WebGUI Configuration page and click WAN Connection to set the WAN
connection mode.
Access the WebGUI Configuration Page
1. Make sure the connection between your device and the client is correct.
2. Launch the internet browser and enter
Notes:
It is recommended that you use IE (6.0 or later), Firefox (2.0 or later), Opera (10.0 or later), Safari (4.0 or
later), Chrome (5.0 or later).
3.The login page appears as follows.
Check the label on your device to gain the
Please do remember the new password when you change the
http://192.168.0.1
Confidential and Proprietary Information of ZTE CORPORATION 7
or http://ufi.home in the address bar.