Hardware Health Configure/Pc Health Status - JETWAY XBLUE77A3 User Manual

BIOS Screen of AMD 780G/780V + SB710 motherboard
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
Advanced PCI/PnP Setting
WARNING: Setting wrong values in below sections
may cause system to malfunction
Clear NVRAM
Plug &Play O/S
PCI Latency Timer
Allocate IRQ to PCI VGA
Palette Snooping
PCI IDE Bus Master
IRQ Resources
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Plug &Play O/S
The optional settings are: No; Yes
No: Let the BIOS configure all the devices in the system.
Yes: Let the operating system configure Plug and Play devices, not required for boot if your
system has a Plug and Play system.
Allocate IRQ for PCI VGA
The optional settings are: No; Yes.
Yes: Assigns IRQ to PCI VGA card if card requests IRQ.
No: Does not assign IRQ to PCI VGA card even card requests an IRQ.
Palette Snooping
The optional settings are: Enabled; Disabled.
Enable: inform the PCI device that an ISA graphics devices is installed in the system so the
card will function correctly.
PCI IDE Bus Master
The optional settings are: Enabled; Disabled.
Enable: BIOS uses PCI busmastering for reading/writing IDE devices.
Offboard PCI/ISA IDE Card
Some PCI IDE cards may require this to be set to the PCI slot number that is holding the card.

3-10 Hardware Health Configure/PC Health Status

This section shows the Status of you CPU, Fan, and Warning for overall system status. This
is only available if there is Hardware Monitor onboard.
Miscellaneous Control
No
No
64
Yes
Disabled
Enabled
Press Enter
F6:Fail-Safe Defaults
36
Help Item
Options
Clear NVRAM during System Boot
F7:Optimized Defaults