Panasonic PT-RZ31К Operating Instructions Manual page 74

3) Press the <ENTER> button.
f The [PROJECTOR SETUP] screen is displayed.
4) Press as to select [LENS].
5) Press the <ENTER> button.
f The [LENS] screen is displayed.
6) Press as to select [LENS HOME POSITION].
7) Press the <ENTER> button.
f The confirmation screen is displayed.
8) Press qw to select [OK], and press the <ENTER> button.
f [PROGRESS] is displayed in the [HOME POSITION] screen, and the projection lens is moved to the origin
position.
Note
f [LENS HOME POSITION] cannot be executed when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is set to [NOT
SELECTED].
f [LENS HOME POSITION] will not operate correctly when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is set incorrectly.
Change the setting if the type is different from the projection lens attached to the projector.
f The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu → [LENS] → [LENS CALIBRATION]
is not executed.
f The home position does not match with the optical image center position.
f The home position varies depending on the projection lens type. For details, refer to "Lens shift range" (x page 75).
f The home position of the Fixed-focus Lens (Model No.: ET-D75LE95, ET-D75LE90) may deviate from the designed position.
When operating from the lens shift adjustment screen
1) Press the <DEFAULT> button on the remote control while displaying the lens shift adjustment screen.
f The confirmation screen is displayed.
2) Press qw to select [OK], and press the <ENTER> button.
f [PROGRESS] is displayed in the [HOME POSITION] screen, and the projection lens is moved to the origin
position.
Note
f The [HOME POSITION] screen is not displayed when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is set to [NOT
SELECTED].
f The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] is set
incorrectly. Change the setting if the type is different from the projection lens attached to the projector.
f The projection lens is not moved to the correct home position when the [PROJECTOR SETUP] menu → [LENS] → [LENS CALIBRATION]
is not executed.
f The home position varies depending on the projection lens type. For details, refer to "Lens shift range" (x page 75).
f The home position of the Fixed-focus Lens (Model No.: ET-D75LE95, ET-D75LE90) may deviate from the designed position.
f You can also display the [HOME POSITION] screen by pressing the <LENS> button on the control panel or the <SHIFT> button on the
remote control for three seconds or longer.
74 - ENGLISH
Chapter 3 Basic Operations — Projecting