Panasonic PT-RZ31К Operating Instructions Manual page 193

Descriptions of items
1 Page tab
Switches pages by clicking this item.
2 [Status]
The status of the projector is displayed by clicking this item.
3 [Projector control]
The [Projector control] page is displayed by clicking this item.
[Projector status] page
Click [Status] → [Projector status].
Display the status of the projector for the following items.
1
2
3
4
5
6
1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [MAIN VERSION]
Displays the firmware version of the projector.
3 [POWER]
Displays the status of the power.
4 [SHUTTER]
Displays the status of the shutter. ([CLOSE]: Shutter function
enabled; [OPEN]: Shutter function disabled)
5 [OPERATING MODE]
Displays the setting status of [OPERATING MODE].
6 [MAX LIGHT OUTPUT LEVEL]
Displays the setting status of [MAX LIGHT OUTPUT LEVEL].
7 [SERIAL NUMBER]
Displays the serial number of the projector.
8 [REMOTE2 STATUS]
Displays the control status of the <REMOTE 2 IN> terminal.
9 [OSD]
Displays the status of on-screen display function. ([ON]:
Display; [OFF]: Hide)
10 [AC VOLTAGE]
Displays the input supply voltage.
11 [LIGHT OUTPUT]
Displays the setting status of [LIGHT OUTPUT].
Chapter 5 Operations — Web control function
1
2
3
4
5
6
4 [Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5 [Change password]
The [Change password] page is displayed by clicking this item.
6 [Crestron Connected(TM)]
The operation page of Crestron Connected
clicking this item.
12 [INPUT]
Displays the status of the selected input.
13 [INTAKE AIR TEMPERATURE]
Displays the status of the intake air temperature of the projector.
14 [OPTICS MODULE TEMPERATURE]
Displays the status of the internal temperature of the projector.
15 [EXHAUST AIR TEMPERATURE]
Displays the status of the exhaust air temperature of the
projector.
16 [LIGHT1RUNTIME]
Displays the runtime of light source 1.
17 [LIGHT1-B], [LIGHT1-S]
Displays the lighting status and temperature status of light
source 1.
18 [LIGHT2RUNTIME]
Displays the runtime of light source 2.
19 [LIGHT2-B], [LIGHT2-S]
Displays the lighting status and temperature status of light
source 2.
20 [SELF TEST]
Displays the self-diagnosis information.
21 [PROJECTOR RUNTIME]
Displays the runtime of the projector.
is displayed by
TM
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
ENGLISH - 193