Panasonic PT-RZ31К Operating Instructions Manual page 128

6) Press the <ENTER> button.
Note
f The single link is a setting to display one image with one input signal. The dual link is a setting to display one image with two input signals.
f When the [SIMUL INPUT SETTING] is set to anything other than [OFF], [SDI LINK] is fixed to [SINGLE].
f The [SDI LINK] setting cannot be changed when the [DISPLAY OPTION] menu → [BACKUP INPUT SETTING] → [BACKUP INPUT MODE]
is set as the combination to include the SDI1 input or SDI2 input.
f The content set is displayed in [SDI LINK SETTINGS].
f [P IN P] cannot be set when [AUTO] is set.
Setting [RESOLUTION] in [SDI IN]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the <ENTER>
button.
f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen is displayed.
f When [DUAL LINK SETTING] is selected, proceed to Step 5).
4) Press as to select [SDI1] or [SDI2], and press the <ENTER> button.
f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen of the selected item is displayed.
5) Press as to select [RESOLUTION], and press the <ENTER> button.
f The [RESOLUTION] screen is displayed.
6) Press as to select the item, and press the <ENTER> button.
f Select [AUTO], [720x480i], [720x576i], [1280x720p], [1920x1080i], [1920x1080p], [1920x1080sF], or
[2048x1080p] when [SINGLE LINK SETTING] is selected.
f Select [AUTO], [1920x1080i], [1920x1080p], [1920x1080sF], or [2048x1080p] when [DUAL LINK SETTING]
is selected.
Setting [3G-SDI MAPPING] in [SDI IN]
1) Press as to select [SDI IN].
2) Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3) Press as to select [SINGLE LINK SETTING] or [DUAL LINK SETTING], and press the <ENTER>
button.
f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen is displayed.
f When [DUAL LINK SETTING] is selected, proceed to Step 5).
4) Press as to select [SDI1] or [SDI2], and press the <ENTER> button.
f The [SINGLE LINK SETTING] or [DUAL LINK SETTING] screen of the selected item is displayed.
5) Press as to select [3G-SDI MAPPING].
6) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[LEVEL A]
[LEVEL B]
Note
f This does not operate when the SD-SDI signal or the HD-SDI signal is input.
128 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically select [LEVEL A] or [LEVEL B].
Fixes the mapping method to 3G-SDI Level-A.
Fixes the mapping method to 3G-SDI Level-B.