Panasonic PT-RZ31К Operating Instructions Manual page 190

r Factory default setting
f Following setting has been made as a factory default.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]/[DNS2]
Operating the computer
1) Turn on the power of the computer.
2) Perform the network setting following the instruction of your network administrator.
f Operation from the computer is possible by configuring the network setting of the computer as follows if the
projector is in the factory default setting.
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
190 - ENGLISH
Chapter 5 Operations — Network connection
OFF
192.168.0.8
255.255.255.0
192.168.0.1
None
192.168.0.10
255.255.255.0
192.168.0.1