Panasonic KX-HGW600 Operating Instructions Manual page 39

Connecting the KX-HGW600 to an Ethernet hub
To connect the KX-HGW600 to an Ethernet hub on the LAN (Intranet), follow the steps
below.
1.
Connect the Ethernet cable to the WAN jack of the KX-HGW600.
2.
Connect the other end of the Ethernet cable to one of the jacks of the Ethernet
hub.
Ethernet hub
Note
Some Ethernet hubs may have a polarity switch or need category 5 cross cable
instead of category 5 straight cable. Please refer to the Ethernet hub's manual
for more information.
[For assistance, please call: 1-800-272-7033]
Operating Instructions
WAN jack
Ethernet cable
(included accessory)
39