Panasonic KX-HGW600 Operating Instructions Manual page 113

4.
Click [Upgrade]. The firmware is updated.
• If completed, the dialog box
appears.
5.
Click [Restart Now!].
Notes
• After updating, initialize the KX-HGW600 by pushing the FACTORY
DEFAULT RESET button (
please refer to the Panasonic web site.
• When you use the DHCP server function (
devices on the LAN side.
Error Messages
File size is invalid
CRC error occurred
Selected file is invalid
Update it again.
Not enough memory
[For assistance, please call: 1-800-272-7033]
• If not completed, an error message
Page 124) if required. For more information,
Error Messages
Cause and Remedy
Your selected firmware file is damaged. If the firmware file
was downloaded from the Panasonic web site, download it
again.
Your selected firmware file is not for the KX-HGW600.
Reselect the proper file.
OR
Make sure your hardware version matches the firmware file
by reading the readme file that comes with the firmware file
( Page 118). If not, download the latest firmware from the
Panasonic web site.
The KX-HGW600's internal memory has been depleted.
Restart the KX-HGW600 and update it again.
Operating Instructions
appears. For more information,
please refer to "Error Messages"
below.
Page 106), restart all the
113