Turning On The Devices - Panasonic KX-HGW600 Operating Instructions Manual

Turning on the Devices

After completing the connection between the PC and the KX-HGW600, make sure the
PC is turned off and follow the steps below.
1.
Insert the cable clamper into the cable clamper hole of the KX-HGW600 until you
hear a click.
Cable clamper
(included accessory)
2.
Connect the DC plug of the AC adaptor to the DC IN jack and the AC plug of the
AC adaptor to the power outlet.
Power Outlet
(AC 120V)
AC adaptor
(included accessory)
Notes
• AC adaptor is used as the main disconnect device, ensure that the
socket-outlet is located/installed near the equipment and is easily accessible.
• Use Only with specified Panasonic AC adaptor PQLV12Y.
[For assistance, please call: 1-800-272-7033]
DC IN jack
DC plug
Operating Instructions
21