White Balance Sensor; Black Balance Adjustment - Panasonic HDC-SD5BNDL Operating Instructions Manual

Recording
≥ Sunrise, sunset etc.
To restore to the automatic adjustment
Set the white balance mode to [
≥ You can also restore the automatic adjustment
by setting the AUTO/MANUAL/FOCUS switch
to AUTO.
To set the white balance manually
1
Select [ ], fill the screen with a
white subject.
2
Move the cursor button up to
select [ ].
≥ When the [ ] display stops from flashing the
setting is complete.
≥ If the [ ] display continues flashing, the
white balance cannot be set because it is too
dark etc. In this case, use the automatic white
balance.
ª White balance sensor
The white balance sensor A detects the type of
light source during recording.
Do not cover the white balance sensor during
recording, or it may not function properly.
ª Black balance adjustment
This is one of the 3CCD system functions that
automatically adjusts the black when the white
balance is set in the manual adjustment mode.
62
VQT1H62
].
AWB
A
When the black balance is adjusted, the screen
will temporarily be black. (The black balance
cannot be adjusted manually.)
1 2
1 Black balance adjustment in progress.
(Flashes.)
2 White balance adjustment in progress.
(Flashes.)
3 Adjustment completed. (Lights up.)
≥ When the [ ] display flashes, the manual
white balance previously adjusted is stored.
Whenever recording conditions change, re-set
the white balance for correct adjustment.
≥ When setting both the white balance and the
iris/gain, set the white balance first.
3