Still Picture (Jpeg Images) Playback - Panasonic HDC-SD5BNDL Operating Instructions Manual

Playback
Still picture (JPEG images)
playback
Play back the still pictures recorded on the card.
1
Rotate the mode dial to select
.
The lens cover closes.
2
Press the cursor button up and
then select the [
playback) tab.
A Still picture playback tab
The still pictures recorded on the SD card are
displayed as thumbnails (reduced-size images).
3
Select the file to be played back.
B
B Previous page
C Next page
D File number display
E Folder/file name
The selected file will be encircled by a yellow
frame.
≥ If 9 or more files have been recorded, the next
(or previous) page can be displayed by moving
the cursor button left and right or moving the
68
VQT1H62
] (still picture
A
C
D E
cursor button down, selecting
by moving the cursor button left and right and
then pressing the cursor button.
≥ The file number display switches to the page
number when the still picture playback tab or
/ is selected.
4
Press the cursor button.
The selected file is played back on the full
screen.
≥ The operation icon is automatically displayed
on the screen.
5
Move the cursor button to
operate.
1/;: Slide show (playback of the still pictures
on the SD card in numerical order) start/
pause.
E: Plays back the previous picture.
Plays back the next picture.
D:
Stops the playback and shows the
∫:
thumbnails.
ª About still picture compatibility
≥ This unit is compliant with the unified standard
DCF (Design rule for Camera File system)
established by JEITA (Japan Electronics and
Information Technology Industries
Association).
≥ The file format supported by this unit is JPEG.
(Not all JPEG formatted files will be played
back.)
≥ If a non-standard file is played back, the folder/
file name may not be displayed.
≥ This unit may degrade or not play back data
recorded or created on other products and
other products may degrade or not play back
data recorded on this unit.
≥ While the SD card is being accessed (while the
card access lamp lights up), do not open the
SD card/battery cover and remove the SD
card.
/