Installation (Connecting to a computer)
Important:
L Start the application software you want to use with the unit after installation.
Connect the included USB cable to the unit and your computer.
L The status indicator lights up red when the computer is turned on. If the top cover
is opened, the status indicator lights up blue (page 6).
L To assure continued emission limit compliance, use only the shielded USB cable
included.
To disconnect the unit
Unplug the USB cable from the computer.
Controls
Closed top cover
A B C
E
F
A {T} (Microphone-mute)
B Status indicator
C Top cover
D Speaker
D
G
Opened top cover
E Microphone
F Volume buttons ({<}{>})
G USB port
H Receiver
Preparation
C
H
5