Table of Contents
Advertisement
Playback options
SPEAKERS
A
B
Using
SPEAKERS
B
ADVANCED
DUAL AMP
function
Enjoying BI-
AMP sounds
Playing DVD-
Audio
18
RQT8549
ADVANCED
[BI-AMP]
DUAL AMP
AUTO SPEAKER
ADVANCED
WIRELESS
DETECTOR
DUAL AMP BI-AMP
READY
POWER
SPEAKERS
MULTI CH
TUNE
A
B
SURROUND
AUTO SPEAKER
DETECTOR
AUX
S VIDEO IN VIDEO IN L
R
Sound
is
output
from
speakers
connected
to
FRONT B terminals on this unit.
Press
The advanced dual amp function activates
automatically when you use 2-channel
stereo playback or 5.1-channel playback.
The unit takes advantage of the
unused
surround
back
speaker
amplifier, and runs one speaker with
two amplifiers when this function is on.
Advanced dual amplifier offers you sounds
that are clearer and higher in audio quality
than those available in normal playback.
This function activates automatically when you
play analog audio sources or two-channel PCM
signals through bi-wiring connections.
The unit takes advantage of the front speaker
and the surround speaker amps, and drives the
speakers' high-frequency and low-frequency
sections separately when this function is on.
The advanced dual amp function (
above) is
á
available with the bi-amp function. When
combined, the two functions enhance clarity
and audio quality of stereo sounds.
Enjoying DVD-
Connect the unit to a DVD recorder or DVD
Audio sources
player using the HDMI cable (
through digital
digital cable (COAXIAL 1) (
connections
• Refer to page 8 for analog 6-channel
connections.
• Turn SPEAKERS on.
(DVD ANALOG 6CH only works when either
Playing DVD
SPEAKERS A or BI-WIRE is on.)
• Set the selector to "DVD ". (á page 16)
ANALOG 6CH
PLAYER
DVD
ANALOG 6CH
• To cancel, press and hold until "DVD " is displayed.
You can enjoy high quality stereo sound with
Enjoying high
192 kHz 2-channel DVD-Audio.
quality 2-channel
analog sounds
HDMI
VOLUME
INPUT SELECTOR
MENU
SETUP
ENTER
RETURN
the
the
Note
• Playback is in stereo (2-channel).
• When only the SPEAKERS B setting is selected and the input source is
multi-channel, "2CH MIX" appears on the display.
• To turn off the sound from the speakers connected to the FRONT A
terminals, press [SPEAKERS A] and cancel "
• Selected speakers output sounds assigned to front 2 channels when you
make analog 6-channel connections for DVD-Audio sources.
• If you select SPEAKERS B only, the following are set automatically
irrespective of settings selected in "Setting speakers and their sizes"
(
page 31).
á
Speaker size: LARGE
Subwoofer: NO (Bass is output from the front speakers.)
• The [ADVANCED DUAL AMP]
indicator
stays
on
advanced dual amp is at work.
• Refer to page 11 for connecting
BI-WIRE speakers.
• Select "YES " in "Setting bi-wiring
connections" (
page 31).
á
• Switch
the
[MULTI
SURROUND] effect off (
page 5) or a
á
pages 6 and 7).
á
Press and hold until
"DVD 6CH " is displayed.
RECEIVER
AV
SYSTEM
TV
TUNER
CD
VCR
BAND
A
Note
while
You can also set the advanced dual amp
function off (
page 33).
á
Note
You cannot use the bi-amp function with
analog 6-channel connections for DVD-
Audio sources (
• The [BI-AMP] indicator stays on while
CH
bi-amp is at work.
page 16).
á
• Refer to page 32 for "Making bi-amp
settings".
Speaker settings (
á
when the unit receives a DVD-Audio multi-channel
signal through the HDMI input terminal. Set distances
from the listening-viewing position and speaker sizes
on your DVD recorder or DVD player in such cases.
When the unit is connected to a
DVD recorder
Playback is unavailable while the
input source is "DVR ". Make
analog 6-channel connections and
switch the mode to "DVD ".
Note
Speaker settings made on the unit
(á pages 14 and 31) are canceled when
you use DVD analog 6-channel playback.
Set distances from the listening-viewing
position and speaker sizes on your DVD
recorder and DVD player.
1. Cancel the "DVD 6CH " setting.
(á above)
2. Set the input signal to "ANALOG " in
"Setting input signals". (
RECORDER
DVD
PLAYER
DVD
ANALOG 6CH
".
below).
á
pages 14 and 31) are canceled
page 32)
á
Hide quick links:
Advertisement
Table of Contents
