Before Playback Detecting Speakers Automatically - Panasonic SA-XR57K Operating Instructions Manual

Before playback
RECEIVER
AV
SYSTEM
RECORDER
TV
TUNER PLAYER
CD VCR
BAND ANALOG 6CH
VOLUME
0
DISC
DIRECT TUNING ENTER
SKIP SLOW/SEARCH
STOP PAUSE PLAY
DRIVE SELECT DVD RECORDER CM SKIP
ENTER
SUB MENU RETURN
SUBWOOFER TEST
OFF
EFFECT VOL
LEVEL
NEO : 6 TV/VIDEO
SFC
MUSIC MOVIE DIMMER MUTING
Note
• Automatic detection does
not work well depending
on speakers and cables.
Make speaker settings
manually in such cases
(á page 31).
• These settings
effective after the unit goes
off.
Points regarding speaker sizes (á page 31)
The factory-set speaker size is "SMALL".
14 You can set the lowpass filter frequency according to the playback frequency when the speaker size is "SMALL". (The factory-set lowpass filter frequency is 100 Hz.)
See "Setting speakers and their sizes" for changing the speaker size to "LARGE ".
RQT8549
AUTO SPEAKER
DETECTOR
[ ]
POWER
Detecting speakers automatically
The unit checks each speaker's connection status and make speaker settings automatically.
Perform the following steps when you connect a new speaker.
The unit considers seven speakers and one subwoofer are connected to the unit (keeps factory
settings) unless you perform these steps.
You can also make speaker settings manually (á page 31 "Setting speakers and their sizes").
DVD
1
Turn the unit on.
DVD
Press
CH
Check the speaker presence.
2
Press
AUTO SPEAKER
Automatic speaker detection starts.
(The [AUTO SPEAKER DETECTOR] indicator
begins to flash when you press the buttons.)
TV
(The [AUTO SPEAKER DETECTOR]
indicator goes off when detection is through.)
L: Front left
SB ： Surround back
When you connect surround speakers to the unit wirelessly using SH-FX50/SH-FX60 (á page 12)
• The connection status for "S " becomes present when the unit performs automatic
speaker detection.
"WARNING " messages may appear on the display depending on detection results.
remain
SPEAKERS
A B
WIRELESS
AUTO SPEAKER
READY
DETECTOR
AUTO SPEAKER ADVANCED WIRELESS
DETECTOR DUAL AMP BI-AMP READY
POWER
SPEAKERS MULTI CH TUNE
A B
SURROUND
AUTO SPEAKER
DETECTOR
AUX
S VIDEO IN VIDEO IN L R
POWER
SPEAKERS
A B
simultaneously.
DETECTOR
↓
↓
↓
How speakers are displayed
C: Center R: Front right
W ： Subwoofer
HDMI
VOLUME
INPUT SELECTOR
MENU
ENTER
SETUP
RETURN
• The standby indicator [^] goes off when you turn
the unit on.
AUTO SPEAKER
AUTO SPEAKER
DETECTOR
DETECTOR
The unit checks the center speaker, surround speakers,
surround back speakers and the subwoofer in that order.
(The connection status for front speakers is always present.)
The display shows the number of detected speakers
(excluding the subwoofer).
The display shows connected speakers.
Automatic speaker detection ends.
S ： Surround
The unit did not detect the left surround back speaker.
Use the terminal for the left speaker when you connect
one surround back speaker only (á page 11).
The unit did not detect left and right surround
speakers. Connect surround speakers as well when
you connect surround back speakers to the unit.
The unit did not detect one of the two surround
speakers. Check speaker connections.