Huawei U9500 Maintenance Manual page 39

U9500 Maintenance Guide
Step 10 Tighten the screws.
1.Secure the screws in the order shown in the picture.
To secure the screws marked as 1, 2, 3, and 4, set the
screwdriver to the low speed and the torque to 0.6
kgf*m.
To secure the screws marked as 5 and 6, set the torque
to 0.9 kgf*m.
To secure the screws marked as 7, 8, 9, and 10, set the
torque to 1.2 kgf*m.
Step 11 Attach the anti-dismantle label and install the battery cover.
1
.
After you attach the labels, use a cotton swab to
press the labels to ensure that they are tightly
attached. Attach the back label with aligning it
with the lines in the piture.
---End
Issue 1.2 (2012-6-30)
Attach the anti-dismantle label and back label.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Assembly Procedure
2 Install the battery cover.
.
Fasten all latches and ensure the space
between the battery cover and front
cover is within the acceptable range.
34