Ricoh B245-62 Service Training page 72

Toner supply motor on time in
fixed control mode
The toner supply motor on
time is specified by the
setting of SP 2925, and does
not vary.
The default setting is 200 ms
for each copy. The toner
supply motor on time for
each value of SP 2925 is
shown in the table to the
right.
Effective only if SP 2921 is
set to 3.
Slide 72
No additional notes.
Toner Density Control 5
72
Value of Motor On Time
SP2925 (t = 200 ms)
0 t
1 2t
2 4t
3 8t
4 12t
5 16t
6 Continuously
7 Not supplied
B245-62 / PD-C4